Quadcopter racing LED gate bracket foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a part for an indoor drone racing gate for mini drones such as Eachine QX90 or Tiny Woop etc.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a part for an indoor drone racing gate for mini drones such as Eachine QX90 or Tiny Woop etc.
The video below on Youtube is a complete guide how this gate is build using some 16mm VP electrical tubes and LED strips combined with this 3D printed part.
The black parts in the picture are printed in nylon but you´ll do just as great with PLA or ABS.
The gates are easily scaled just by making the tubes longer, and still use the same bracket.
Print instructions
Category: R/C Vehicles Summary
This is a part for an indoor drone racing gate for mini drones such as Eachine QX90 or Tiny Woop etc.
The video below on Youtube is a complete guide how this gate is build using some 16mm VP electrical tubes and LED strips combined with this 3D printed part.
The black parts in the picture are printed in nylon but you´ll do just as great with PLA or ABS.
The gates are easily scaled just by making the tubes longer, and still use the same bracket.