Mount for Belkin KVM switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative to the Belkin F1D008 mount (for their taller line of KVMs)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Designed this model as an alternative to the Belink F1D008 mount, because I could not find any of them anymore. It was specifically designed to fit my F1DN204KVM-UN-3 and my not work with other versions switches (especially the shorter variants).
It is designed to be mounted with #8 flat head screws, but an equivalent metric screw should also work. Intended to be used to mount the KVM on the bottom of a table.
I recommend printing the mount vertically (minimizes the need for support and force will be applied against the layer lines when mounted). I used 35% infill with 4 layers for walls on a .4 nozzle. The tolerances on this leave some room for play, so it can also likely be printed with a .6 or .8 nozzle without any issue.