Mount for Belkin KVM switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative to the Belkin F1D008 mount (for their taller line of KVMs)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Designed this model as an alternative to the Belink F1D008 mount, because I could not find any of them anymore. It was specifically designed to fit my F1DN204KVM-UN-3 and my not work with other versions switches (especially the shorter variants).
It is designed to be mounted with #8 flat head screws, but an equivalent metric screw should also work. Intended to be used to mount the KVM on the bottom of a table.
I recommend printing the mount vertically (minimizes the need for support and force will be applied against the layer lines when mounted). I used 35% infill with 4 layers for walls on a .4 nozzle. The tolerances on this leave some room for play, so it can also likely be printed with a .6 or .8 nozzle without any issue.