Counting matching models…
This is a mount for the 12-port Belkin power strip using the Underware system. This clips on to the power strip and uses the strip's mounting holes as in Trevor Harrison's original version. This version adds ample threaded attachment…
I wanted a charging station for my iPhone and Apple Watch, but the ones I liked were pretty expensive. So I thought it'd be a good idea to get a regular MagSafe charger and 3d print my own, but even the MagSafe chargers from Apple cost…
A simple phone stand that should fit most mobile phones and integrates the wireless Belkin charger F7U054. Print instructions Printed in PETG, 0,2mm, supports & brim.
This is a simple under-desk mount for the Belkin Thunderbolt 3 Dock. It can be attached to the desk with 2 screws per side or some adhesive. Since the dock gets quite hot, I recommend printing this in PETG or something else more…
Since a while I was searching for a decent mobile phone mount for my Smart 451 EVs. This design holds any phone with MagSafe just below the navigation system for easy access. With wireless charging no fumbling with cables needes.…
Very good surge protected extension lead, unfortunately no fixing holes to wall mount it. Here's my quick attempt to design some brackets for it. Hope you find it useful. Please let me know if any adjustments are needed. Designed for 0.4…
This is a simple mounting bracket for the Belkin BoostCharge Pro 4-Port GaN Charger 108W USB charger with two screw holes to hang it up on a wall. Changelog: 2024-10-16: Updated the .fcstd for Freecad v1.0 to fix broken reference geometry…
Needed a mount for the Belkin Pro Thunderbolt 4 Dock, to install it under the desk. The dock clicks in place when installed. The bridge acts as a distance block while installing the sides to the desk, and also acts as a lock, where the…
Charge your phone with the Belkin BoostCharge at an angle for a better view angle at the office. Inclination of the phone will be at 45° portrait. Use a small sized PostIt or something similar to charge the phone in landscape mode. Custom…
I really liked the look of Majestyk2k's SteamDock but I already had several hub's in a different form factor. This model is a remix of https://www.thingiverse.com/thing:5422982 You will need either a 90 or 180 (u shaped) USB adapter. I…
Belkin Thunderbolt 3 Dock Pro stand which can be mounted on table and provide more stable experience during use.
Mounts a Belkin 4 Port USB Hub (F4U058) to a DIN Rail. The bracket is reversible so the power and host USB cables can be mounted either on the right or left side. Print two DIN clips and install 4 M3 x 4mm x 4.6mm heat set inserts into…
A nice and dedicated place for charging your phone. The pad is a bit to big for a 2x4 design, but this give the charger and phone a nice space to do their thing.
Here are a pair of simple mounts to allow wall or underdesk mounting of the above belkin hub. I've printed mine in PLA with a 0.4 nozzle and any setting will do depending on the finish you want to achieve.
Inspired by the original model from Scott Yu-Jan in Maker World.
Designed this model as an alternative to the Belink F1D008 mount, because I could not find any of them anymore. It was specifically designed to fit my F1DN204KVM-UN-3 and my not work with other versions switches (especially the shorter…
This is a remix of an existing multiboard underware project to instead mount using openConnect to openGrid/underware. I've included mounts for the Lite version (which is what I use) but you could easily mount to the full version. I've…
This is a simple holder for an iPhone12 pro in an Apple (silicone) case and a Belkin Boost-Up inductive charging pad (F7U054). It holds the phone at a 75 degree angle and holds the charging pad in the right place to charge the phone…
Mount for Belkin extension cord. Additionally you will need: 4x 5mm diameter screws to attach the mount. Cable ties for managing cables
Belkin induction pad charging support
This is a slide in router wall mount for the belkin rt3200, a very inexpensive and popular router for openwrt. It's a vertical mount, so the router either slides in right side up or upside down. It would work sideways also, but the router…
Print on its side, the flat side. Hook to attach my phone holder to the cupholder. This enables me to have it to hand whenever I need it, while still being able to use cupholders and keep it out of other storage areas. I have a Belkin…
I wanted to use Standby mode in iOS 17 but had a lay-flat Belkin charging station. I resolved the issue using SCIENCE!
This is an adapter for the Belkin PowerHouse Charging Dock. This model allows the use of a Lightning to Type-C adapter so that you can continue to use your dock. I used these Lightning to Type-C Adapters from Amazon ( LINK ). I printed…
We know that the better the alignement between the charging pads, the better and faster the charging, with this in mind, and tired of missing charges because of misalignement of the phone over the pad, I decided to create a pad that…
revised for the Belkin 12-port surge protector variant that includes Ethernet and coaxial pass-thru b/c it's thicker
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…
Holder to mount the USB power adapter under the desk.
The Belkin Continuity Camera Mount for Laptops is great, but I wanted to also use it on my Apple Studio display so I designed this simple shim. Just slide the mount into the slot and put on your display. If you want to modify the mount…
I had the Belkin Wireless Charger but an older phone. It supported Wireless Charging but didn't have Magsafe (makes possible to hold to Phone in Air to the charger and perfect aligned). So I designed this model. It fits perfectly and the…
This short video shows the easy assembly: This exotic car-inspired wireless phone charger holder (one of a set of two body choices) is designed for the Belkin Boost Up Wireless Charging Pad 10W, which is compatible with: Qi phones iPhone…
A small contraptin to affix a SurgeMaster to a cabinet, table or drywall. You will need 4 M3 16mm (or longer) bolts and nuts 4 M3/M4 screws Just screw the bottom part to your table/cabinet/drywal, insert the SurgeMaster, and screw the top…
A Stand for Belkin inductive Charger
Some prefer their nighttime / sleeping time phone charging position to be flat, with a dark screen. This design is for that. See my other design for those who want to see the standby mode options such as clock or calendar, etc. This short…
This cradle is specifically for the Belkin WIA002BTBK wireless charging pad https://www.belkin.com/in/p/wireless-charging-pad-15w/P-WIA002.html , and the Pixel 9 Pro in the official case.
The model designed with 2 ways fixed slot, you will hear a confirmation "click" sound once it slide to the correct position You can easily detach the power extension with this accessory Printing friendly, the model dedicated designed to…
I saw a Star Wars Stormtrooper charging stand that I thought was cool but I had a wireless Belkin charger so I thought I could remix a few items to make my own. Category: Mobile Phone
Print two of these. These are to be used with Belkin RT3200 installed upside down, suggest using double-sided 3M tape.
Simple slide on mount for a Belkin Universal Media Reader on the new iMacs or new thunderbolt or LED monitor. Instructions Slide the reader in and plug in the USB. Simple Category: Computer
Take youself back to 1990 and you want to save room on your desk for another computer. The solution is a KVM. The problem is KVM cables for the Belkin OmniView KVM are not bundled together and make cable management an absolute nightmare.…
Needed an adapter to be able to charge my Samsung Galaxy Z Flip 5 on a Belkin 3-1 wireless charger.
An under desk mount for the Belkin Advance Secure 8-Port Keyboard/Mouse (KM) Switch (P-F1DN108K-3)
The mount is quite flimsy in tripod mode as the joint has a ton of flex. So I've made an adapter which eliminates the wobble by keeping the joint shut!
Was a really quick model I made so i could mount my strip, Huge Thankyou to Valentin Jimeno for the holder I used. Make sure this is printed on its side, and use grid supports as shown in the photo The Larger side is quite tight for me,…
My iPhone 13 Mini was too short to work with this wireless charger so I made a simple thing to boost up my phone so it can wirelessly charge. I could just put my phone horizontally across but I did not want to do that so I over-engineered…
Modelo Soporte para base de carga Magsafe 3 en 1 Belkin Black 15w y compartimento para guardar accesorios. Apague el ventilador auxiliar. El archivo predeterminado con un relleno del 15% está bien, pero debe apagar el ventilador auxiliar.…
I have a Belkin F6C550-AVR sitting on a wheeled cart. The UPS can fall over sideways sometimes. This is designed to fit the feet of the UPS and has sides to prevent the UPS from tipping over when moved quickly. This was printed in PETG…
A desktop case for the belkin f5u404-blk USB 2.0 Switch. Just as simple as I could draw it in Fusion.
This is a wall mount that uses double sided tape to mount a stand for your phone using the Belkin Wireless Charger F7U05 I have an Iphone 13 it works with it I Have to take off the case but i think its just the case. used 20% infill and I…
MagSafe add-on for Belkin Charge + Sync Dock, since I'm too cheap to throw the old thing out. Tall version allows your phone to float and rotate freely, while short version sits in the dock seamlessly. Choose the one you like. Use M2…
Shroud to magnetically mount the Belkin Thunderbolt 4 Dock Pro to the underside of your desk using LTTStore's MCM system. I wanted my dock hidden but still easily accessible, so I designed this mount to work with the MCM magnetic mounting…
Designed to work with command strips or wood screws.
This mount allows you to attach a Belkin MagSafe charger to standard 2020 aluminum extrusions (commonly used in 3D printers and DIY frames). Perfect for keeping your phone accessible for monitoring, timelapses, or remote control. Required…
This is a box to store Belkin Power Meter Box. Support material is not required. An infill of 20% is recommended. This object's main web page is: https://www.ctheroux.com/belkin-power-meter-box/. This object was designed using openSCAD.…
A simple box for storing and transporting the Belkin SoundForm Adapt. Designed to use 3mm foam sheets cut to size to line all of the insides.
The screw mounts for Belkin's awkwardly shaped plugboard never worked properly for me, so I designed these to replace them. You should be able to print these oriented as-is, with no supports, in any layer height. I used PLA but any…
Inspired by the original model from Scott Yu-Jan in Maker World.
This is a remix of an existing multiboard underware project to instead mount using openConnect to openGrid/underware. I've included mounts for the Lite version (which is what I use) but you could easily mount to the full version. I've…
revised for the Belkin 12-port surge protector variant that includes Ethernet and coaxial pass-thru b/c it's thicker
Holder to mount the USB power adapter under the desk.
This mount allows you to attach a Belkin MagSafe charger to standard 2020 aluminum extrusions (commonly used in 3D printers and DIY frames). Perfect for keeping your phone accessible for monitoring, timelapses, or remote control. Required…
I really like the MagSafe mounting idea from Apple and bought the Car Vent Mount PRO with MagSafe from Belkin when it came out. But after a while the fact that it hangs on my vent kind of bugged me. Also, in my car (a VW), I have a…
It's a little snug, but it fits a FR extension lead (single-row). I suspect it fits a UK one too.
I have a pegboard mounted behind my tv stand to help with all the cable management and made this holder for the Belkin Power Strip. Feel free to tinker: https://www.tinkercad.com/things/jXFLYHCr4qL-belkin-power-strip-pegboard-mount
Fits the iphone13 and iphone 12. Should fit most other phones that are not huge. I use this thing daily and it has saved me from moving my phone of the charger during the night. It has some holes on the bottom where you can add rubber…
This is a very simple stand for a Belkin AirPlay 2 player. It was quickly thrown together on TinkerCad, then imported into Fusion 360 to add the fillets. The “slot” is a slightly off center, but good enough for what I needed. I printed it…
Support bracket to hold a 4 plug BELKIN power strip to an IKEA SKADIS organisation system. Needed a way to hold the 4 plug belkin power strip to an IKEA SKADIS board, couldnt see one so modelled it myself. For reference, the skadis side…
This is a mounting clip for the Belkin Essentials Surge Protector. It lets you attach the surge protector to your Multiboard setup using the Multiconnect system by David D. You can use as many clips as needed to support the full length of…
Remix of a mount by @another_variable on Thingiverse. Substantive changes (open front) to allow unmounting without unplugging, and editorial changes for better printability and fit. Print vertically as oriented in the 3MF, and no supports…
Surge Protector: https://a.co/d/fYFFCJW Note, you will need to remove the provided cable organizer on the surge protector to fit this design. Print both items to complete the mounting.
Vertically mount your metal Belkin power strip under your desk
Face plate slides together holding Belkin pad in place. The stand is made to stand straight up or at an angle. No glue required. https://www.amazon.com/dp/B0F8LMHB64?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Simple Belkin Power Strip Bracket. Print one Small and one Large. They go on opposite ends of the power strip. Category: Computer
A bedside stand for quick charging overnight. The angle of the phone is 6 degrees, so it's ideal for a bedside clock. This works with a Samsung S21 with or without a case, so I'd assume that any other similar sized phone would work too.…
The belkin smartphone suction cup mount is a nice design, though it has the tendency to woble when driving on rougher roads. This ring can be wedged between the tightening ring and the mount making the connection stiffer and…
Preface First things first this was built for the following dock. This will most likely not fit any other Belkin dock offering.…
I needed a mount for a Belkin USB 2.0 hub, rather than leaving it lying around. The mount is for a 4-port USB 2.0 Hub, Belkin model # F4U040v. Mount to frame with 2x M3 screws and t-nuts. It works! Print Settings Printer: Custom Delta XL…
I wanted to hang a Belkin, Gray, 12 outlet power strip on the back of my entertainment center. The unit has a 4.5mm plate running across the back. My design hooks into this plate. You use the Wide Hanger at the fat end near the power…
This is a Tilt stand hold and align an iPhone 12 Pro Max with a Belkin "Boost Charge" Wireless Charging Pad 15W (model number WIA002). It is best connected with some right angle usb-c adapters. This stand holds the phone at a 60 degree…
Holds a Belkin 12 port power strip by the mounting holes as well as clips
This is a stand for the Belkin wireless charging station: "BOOST↑UP™ Bold Wireless Charging Pad 10W for Apple, Samsung, LG and Sony". See: https://www.belkin.com/us/p/P-F7U050/ Quick and easy to print with no support. It offers a place to…
The Belkin Wireless Charger 10W is great for my Pixel 3, however I find I can accidentally place the phone off-center, and then it charges slowly and gets hot, or doesn't charge at all. Hence I printed a part to fit the phone. The…
Dual Belkin Thunderbolt 3 Pro dock, to house two of these docks neatly on the desk
A 2x2 gridfinity module accommodating the Belkin Magsafe-compatible Qi charger . I designed it to lay flat, so that I could charge both magsafe compatible i-Devices, as well as other gear that does not snap onto the charger (e.g. first…
Under desk mount for the Belkin USB Hub (Model# F4U090). Slide it in from the front and its a snug fit so wont come out when you unplug something. Needs 2x 30mm (or longer) screws to mount it to the desk.
Make your Belkin magsafe 2 in 1 charging stand a 3 in 1, for those who bought an apple watch after this stand like me. Gotta really squzze it in but be careful don't break the wire behind the steel bar. Print Settings Printer Brand:…
A friend of mine broke the legs of his Belkin Boost Up Qi charger, so I made him a new mount. I build it using basic shapes in PrusaSlicer. You can edit dimensions or shape in the included original 3mf file if you want to. It currently…
I've found that the only Magsafe car holders for phones are the ones that attach to the Vent, so I've been looking for a way to use them. PETG will deform in summer, so we recommend printing with ABS. Nut files have been added.The right…
holder for usb hub for your honeycomb storage wall. Cut it in the middle and print standing. printed in pla, 0,28mm. Perfect fit.
Remixed of the mount for the HTC Deluxe Audio Strap from Dude_Flash. Modified to fit the Belkin BOOST↑CHARGE 10,000 Mah Battery bank (…
Super basic wall mount for a Belkin USB Hub F5U237. It works, it isn't perfect but it is an early design of mine. Category: Other
Print it with the closed side down, the groove for the cable must face up. Use supports!!! I printed it at a bambulab with .16 layer height and .4 nozzle. I used ASA, but petg should also work. PLA breaks
This is a simple holder for the Belkin 4-Port Ultra-Slim desktop Hub (Product Number F4U038). The holder can be screwed on somewhere and the Hub simply snaps in. Update (2013-01-10): I updated the holder to be 2mm higher and thus having a…
Arm: Ikea Tertial work lamp. Remove the lamp housing. Charger: Belkin magsafe charger model WIA004ttBK. Hardware: 2x M3 screws, 2x M3 nuts. Print standing upright to keep inner surface as smooth as possible. I recommend printing with…
This is a simple design that slips into the holes for mounting screws in the back of the outlet and can then be fit into 1" pegboard. This is an early design which could be improved, but it works well enough for me. Print Details: PLA…
this is for the 3 in 1 Belkin charger wanted to have visibility of the standby alarm clock no supports needed
Printing Instructions Print two centerpieces with 100% infill and higher wall layers. Wall Control - Belkin Power Strip Holder Center Print two of each: 3x0 Flat Right 3x0 Flat Left Post Print Orient the pieces so that the nubs are…
a phone stand that holds a Belkin wireless phone charger i designed this so i could charge my phone and look at it at the same time. this fits my Samsung 20fe and will not fit short phones, mine fits a 200 ish mm phone. i will make…
