Belkin Gray 12 Plug Power Strip Hangers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to hang a Belkin, Gray, 12 outlet power strip on the back of my entertainment center. The unit has a 4.5mm…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I wanted to hang a Belkin, Gray, 12 outlet power strip on the back of my entertainment center. The unit has a 4.5mm plate running across the back. My design hooks into this plate.
You use the Wide Hanger at the fat end near the power switch. Use the Narrow Hanger on the opposite end, placing it as close to the cable clips as possible so you don't impede plugging in the last output in the middle. To affix the hangers to the power supply, use two 14" Zip Ties on each hanger.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Hatchbox PLA Black Post-Printing =============
Feed the zip ties through.
Affix to the Belkin.
Hang.
How I Designed This
Designed in Fusion 360. Export attached.
Just took a swag at a design and I'm super happy with it.
Category: Organization