Belkin USB Hub DIN Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the horizontal mounting of a Belkin 4 Port USB Hub (F4U058) to a DIN Rail.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 0
- Views
- 810
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Mounts a Belkin 4 Port USB Hub (F4U058) to a DIN Rail. The bracket is reversible so the power and host USB cables can be mounted either on the right or left side.
Print two DIN clips and install 4 M3 x 4mm x 4.6mm heat set inserts into them. Secure the clips to the bracket with 4 M3 8mm flat head screws.
For best results, print the clips with 5-8 perimeters in a tough filament like PETG, ABS, or PC. I printed the model in a .45 layer height but other heights will work just as well. The models are correctly positioned on the build plate and no supports are required.
Happy Printing!