Original Prusa Enclosure push rivet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple push rivet that helps covering circular holes in the Original Prusa Enclosure.
- Ocena
- 4,875 / 5
- Polubienia
- 80
- Pobrania
- 399
- Wydruki
- 9
- Wyświetlenia
- 2363
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- BSD License
The Original Prusa Enclosure contains lots of rectangular (for zip ties) and circular holes (serving as additional mount points). Some of these circular holes are needed for extensions, hinges, handles, etc. But most of them are just unoccupied.
There are two part vinyl push clip rivets delivered with the enclosure (with spares) but it's not enough to cover all of these holes, so I made my own rivet.
I tested Prusament PETG printouts and they seem to fit nicely. Squeeze rivet “legs” before pushing it through the hole as there may be residue blocking “legs” compression.