Original Prusa Enclosure push rivet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple push rivet that helps covering circular holes in the Original Prusa Enclosure.
- Rating
- 4.875 / 5
- Likes
- 80
- Downloads
- 399
- Makes
- 9
- Views
- 2,363
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- BSD License
The Original Prusa Enclosure contains lots of rectangular (for zip ties) and circular holes (serving as additional mount points). Some of these circular holes are needed for extensions, hinges, handles, etc. But most of them are just unoccupied.
There are two part vinyl push clip rivets delivered with the enclosure (with spares) but it's not enough to cover all of these holes, so I made my own rivet.
I tested Prusament PETG printouts and they seem to fit nicely. Squeeze rivet “legs” before pushing it through the hole as there may be residue blocking “legs” compression.