Brio Super Flat Bed Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have heavy or long cargo that needs to be hauled on your wooden railroad...no problem for this super flat car.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 206
- Wydruki
- 0
- Wyświetlenia
- 1317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This super flat bed car attached so two standard wooden railroad trains cars and converts them into one large heavy haul car. The cars can pivot around the cargo pins, so even corners and ramps can be navigated.
The bed of the car is sized to haul standard brio cargo, but I have included a bed plate STL that can be a blank slate for any sort of cargo that you would like to create. The pocket in the bed of the car is 2.1"x1.1"x0.050" deep with a 45 deg angle around.
The model pictured was printed in PLA+ using a 0.6mm nozzle and 0.30mm layer heights. Print in the bed orientation shown in the image, with then train car on its side.