Lotharek's Hydra SCART switch Wall mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of a wallmount for Lotharek's Hydra SCART switches. I wanted a mount that is less visible, requires no…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
My version of a wallmount for Lotharek's Hydra SCART switches.
I wanted a mount that is less visible, requires no supports for printing and uses way less material and time to print, so I created one.
I've uploaded three versions with mounting holes from M4 to M6, but you can easily use the Customizer to change the values or use OpenSCAD.
Make sure to measure your Hydra before printing these, as there is a chance that the measurements might differ from mine.
I used two mounts for my W-Hydra2, if you connect a third Hydra module you might want a third mount as well.
Notes:
The STLs and the SCAD files are already in the right orientation for printing, so you can just slice two of them and print them as is.