47 modeli
The SCART-Lock for RetroTINK-4K slips over the top of a standard SCART connector. The thumb screw flanges securely anchor the SCART cable to your TINK so you can enjoy worry-free crispy RGB video. Purchase here:…
GBS-8200 RGB to VGA Video Converter Board + SCART Case Remix adding housing for a SCART plug. This is the PCB mounted right angle version which clips nicely into the housing with the pins exposed so these can be attached to the wires as…
This is a redesigned bowden bend for the Core One. It features an open back, a 1.5cm radius, and lever/cap which allows you to depress the pneumatic button. The bowden bend is the same for all fittings, but I have two versions of the…
______________________________________________________________________________________________________________________________ Main features: Half length dart compatible K25/K26 spring powered Real steel-esque proportions Working…
A simple dust cover for SCART sockets. The plug in the standard model stands about 2mm taller than an actual plug, to allow the base to stick out for easy removal. The short model is 4mm shorter, which should allow it to sit flush with…
SCART — it delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Securely snap the male SCART connector in place on your gRetroStuff LLC (“superg”) gscart 8:2 (aka “gscartsw”) Automatic SCART Switch with…
I would have liked to take the original product from Kytor directly, but shipping is extremely expensive outside US. So I used another model from Kytor as the basis for a scart holder I converted myself. (Thank you guys for the great…
Hey! Ich habe ein Gehäuse für den RetroScart Switcher von PCP Retrotech entworfen, da ich es nicht mochte, dass die Platine ungeschützt war und sich beim Einsetzen der Scart-Kabel leicht verbiegen ließ. Um dieses Problem zu lösen, habe…
SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTink RGB2COMP or COMP2RGB with this SCART-Brace. This is designed to be compatible with…
After assembling my self-layouted SCART breakout board with surface mount decoupling capacitors and signal attenuation resistors, I wanted a robust enclosure for the SCART connectors to be mounted in. This design accommodates structures…
Description: SCART. We love it. We love to hate it. It’s a delivery mechanism for crispy RGB video, but what a mess of a connector. You can squeeze, you can forgo Taco Bell, but sometimes it pops out at the worst possible time. Save your…
The RetroTINK-4K has a SCART input with threaded M4 screw holes for users to create solutions for secure connections, as modern SCART plugs are loose-fitting and prone to disconnection. This hood adds brackets with holes sized for M4 x…
I don't own an otaku or g-scart switch so I have to swap scart cables manually. Since they look mostly the same I decided I wanted an easy and nice looking way to identify which cable belongs to which console. The labels are 40mm wide and…
I wanted something to be able to clamp my scart cables to my hydra switch and keep them in place while carting my station. I added two small extra tabs on top of the clamps so i can push them to release tension for declamping. It doesn't…
I wanted a SCART connector shorter than the original, and the cable to be routed on the left or on the right. It requires two M3 screws (with or without nuts and washers) I printed it on MK4 with smooth plate, standard 0.20mm structural…
There are two plate models, one for heat-set inserts and one with standard hex nuts. Heat sets designed for M4 threads There is a small lip so you can snap the insert in place then melt it. Hex nuts model designed for M4 nuts ("standard"…
I like to use the SCART output on my Multisystem, but I don't like it being connected internally and unable to be disconnected without removing the back casing. This simply adds a hole to the V5 back so that you can plug a SCART connector…
My version of a wallmount for Lotharek's Hydra SCART switches. I wanted a mount that is less visible, requires no supports for printing and uses way less material and time to print, so I created one. I've uploaded three versions with…
Sega Genesis Scart Connector Printed with an Huxley RepRap Pro Instructions Print, clip, add 2 screws --> Play Category: Toys & Games
It's become difficult to find panel-mount SCART sockets, so I made this bracket/spacer that converts a common generic PCB-mount socket to a panel-mount one. This allows you to mount the socket flush and secure against the back panel of a…
This is a low profile case for the 6 Port RGB Scart Switch from Otaku Games , sacrificing the secondary RCA output for decreased height requirements, not interfering with bigger SCART plugs. It's easy to print and provides efficient dust…
i made a small screw-on (dust)cover for the Scart connection of the RT4K a special request from mikoyv ;) Print Settings Printer: Prusa MK3S+ Rafts: No Supports: No Resolution: .15 or .2 Infill: 15% Filament: PETG, PLA, whatever you…
The GSCARTSW with USB power port is flawed. The USB port can be easily ripped off from the PCB if you handle is less carefully than taking care of your first born child. Hence this USB port guard. There's nothing special about this print.…
This 3D printed shell houses and protects the adapter for a snug and sturdy fit. Full supports strongly recommended. Rev 4 is a sturdier, improved fit design which also allows for printing with fewer supports. Use (2) of M3x10 screws.…
If you need to open your Retro-Access Genesis 2 SCART Cable to repair the mini DIN connector wiring, this is a one way trip. This strain relief connector shell will bolt over the metal protective core of the mini DIN once your repair is…
A test print I designed for my printer, Descartes, to calibrate filament that was prone to oozing. Includes bridging, oozing, stringing, dimensional accuracy, detail, and overhang. Printing: Orient this at 45° so the towers are…
Here's some wall stands for the gscartsw from SuperG, where you can just slide it in. I took in count both plexiglass and the small rubber pads for the height, so it should just sit nicely. You need at least two of them, up to 4 to…
Typical use case would be with a Extron Crosspoint or daisy-chain from the output of a PVM, TTL sync only. Connections are turned 90° so they are facing backwards, creating a simple and clean cable management path in your entertainment…
i am a NOOB at this. this if my first Model. i not printed this model myself. it will print without any supports.
As with the original, only works with standard generic SCART heads. Most of my setup are retrogamingcables (RGC) which work fine. First time remixing any STL, so while it works for me it's possible it could need tweaking for tolerances…
SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTINK 2X-SCART with this SCART-Brace. This is designed to be compatible with standard generic…
Small remix of namtabmai's model that fits the 2024-03-13 DJF board.
Mini paletta per raccogliere briciole dalla scrivania o residui di stampa nella stampante 3D
Bumper case for the gSCARTsw line of video switchers. There are 3 versions of the bumper 5.2+ works with all MicroUSB style gSCARTsw 1.4 works with older units with barrel jack plugs VGA works with some of the oldest switches, any with…
This is a JVC IF-C01COMG card cover for DT-V1710CG, DT-V1910CG, TM-H1950CG and TM-H1750CG, probably would work on the 15" series too. Is compatible only with aftermarket cards built using the IF-C01COMG Clone board THT Full size designed…
100x160mm sign, reading “Descartes thought he was here” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs.
______________________________________________________________________________________________________________________________ Main features: Half length dart compatible K25/K26 spring powered Real steel-esque proportions Working…
Bumper case for the gSCARTsw line of video switchers. There are 3 versions of the bumper 5.2+ works with all MicroUSB style gSCARTsw 1.4 works with older units with barrel jack plugs VGA works with some of the oldest switches, any with…
This plate allows you to cut a rough 7x2cm rectangular hole in the back of your CRT TV when you mod it for RGB input via SCART. The typical method is to trace and precisely cut a hole for the socket with a rotary tool. In comparison, this…
René Descartes – Buste 🇫🇷 Description (Français) Ce buste représente René Descartes (1596–1650), philosophe, mathématicien et scientifique français, considéré comme l’un des fondateurs de la pensée moderne. La sculpture est inspirée du…
This is the Pumpprime Competition Addon for the ScarT Mk17 Blaster: Here is a little firing demo: Here is the assembly Guide:
Change the orientation of the Retrotink 5x. See project on Github/OSHPark for the PCB. 2x M3*10mm screws for the PCB 2x M2*5mm screws for enclosure https://github.com/TRP-Retromods/SCARTFlip https://oshpark.com/shared_projects/eteopb15
Tweaked model originally from @Guybrush to have a SCART hole and LR audio holes.
