SCART Cable Connector Bracing Snap Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop your RGB SCART cable connectors from pulling apart.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
SCART. We love it. We love to hate it. It’s a delivery mechanism for crispy RGB video, but what a mess of a connector. You can squeeze, you can forgo Taco Bell, but sometimes it pops out at the worst possible time. Save your pants. Hold In Your SHART.
With the SCART Bracing Snap Clamp.
This is designed to be compatible with standard generic SCART heads as shown in the photos, including those of this same style from RetroGamingCables and Retro-Access. It has also been tested to work with Insurrection Industries SCART connectors, although a tighter fit, it is still compatible. It will not fit over larger heads such as those held together with screws, and metal heads.
Purchase:
This is also available for sale at the Kytor Store.
Printing:
- The 3mf file includes layer modifiers for strength, I recommend using this as basis in PrusaSlicer only
- 0.4mm Nozzle, 0.2mm height, supports on overhangs, PLA
- Duramic 3D PLA+: amzn.to/3RmIwzp
Revision Notes:
- Initial public release: Rev0 female, Rev1 male
Note: Amazon links are affiliates.