1 / 1
SCART Brace for RetroTINK 2X-SCART Scaler — zdjęcie 1

SCART Brace for RetroTINK 2X-SCART Scaler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hold the SCART cable in place on the RetroTINK 2X-SCART.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTINK 2X-SCART with this SCART-Brace.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

Printing:

  • Use Duramic 3D PLA or equivalent
  • 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls
  • No brim or supports necessary

Assembly:

  • Insert your male SCART cable into the 2X-SCART.
  • Drop the SCART-Brace over the enclosure.

Revision Log:

  • Rev0 - Initial release

Note: Amazon links are affiliates.

Tagi