1 / 1
SCART Brace for RetroTINK 2X-SCART Scaler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold the SCART cable in place on the RetroTINK 2X-SCART.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTINK 2X-SCART with this SCART-Brace.
This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.
Printing:
- Use Duramic 3D PLA or equivalent
- 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls
- No brim or supports necessary
Assembly:
- Insert your male SCART cable into the 2X-SCART.
- Drop the SCART-Brace over the enclosure.
Revision Log:
- Rev0 - Initial release
Note: Amazon links are affiliates.