SCART-SnapFit for Gscart 8:2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap the SCART cable in place on your gscart 8:2 SCART switch.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 503
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SCART — it delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Securely snap the male SCART connector in place on your gRetroStuff LLC (“superg”) gscart 8:2 (aka “gscartsw”) Automatic SCART Switch with the SCART-SnapFit™.
This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.
The SCART-SnapFit for Gscart 8:2 is available for purchase on the Kytor Industries Store.
Printing:
Use Elegoo Rapid PETG or alternate PETG
PLA, ABS and ASA are not recommended
0.4mm nozzle, 0.2mm height, minimum 15%+ infill, 2+ walls
No brim or supports necessary
Assembly:
Insert your male SCART cable into the gscart.
Drop the SCART-SnapFit over the top and snap into place.
Variants:
-00 is for the standard gscartsw_lite and gscart 8:2.
-30 is for the above with a Laser Bear Industries Bumper Case.
-31 is for the discontinued gscartsw v3.4 with "VGA" output.
Revision Log:
Rev0 - Initial release
Note: Amazon links are affiliates.