1 / 4
SCART-SnapFit for Gscart 8:2 — image 1
1 / 4

SCART-SnapFit for Gscart 8:2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Snap the SCART cable in place on your gscart 8:2 SCART switch.

Rating
5 / 5
Likes
19
Downloads
102
Makes
1
Views
503
Reviews
1

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial

SCART — it delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Securely snap the male SCART connector in place on your gRetroStuff LLC (“superg”) gscart 8:2 (aka “gscartsw”) Automatic SCART Switch with the SCART-SnapFit™.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

The SCART-SnapFit for Gscart 8:2 is available for purchase on the Kytor Industries Store.

 

Printing:

  • Use Elegoo Rapid PETG or alternate PETG

  • PLA, ABS and ASA are not recommended

  • 0.4mm nozzle, 0.2mm height, minimum 15%+ infill, 2+ walls

  • No brim or supports necessary

Assembly:

  • Insert your male SCART cable into the gscart.

  • Drop the SCART-SnapFit over the top and snap into place.

Variants:

  • -00 is for the standard gscartsw_lite and gscart 8:2.

  • -30 is for the above with a Laser Bear Industries Bumper Case.

  • -31 is for the discontinued gscartsw v3.4 with "VGA" output.

Revision Log:

  • Rev0 - Initial release

Note: Amazon links are affiliates.

Tags