1 / 1
SCART Brace for RetroTINK RGB2COMP and COMP2RGB — zdjęcie 1

SCART Brace for RetroTINK RGB2COMP and COMP2RGB

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A SCART brace for the RetroTINK RGB2COMP and COMP2RGB.

Ocena
5 / 5
Polubienia
18
Pobrania
69
Wydruki
1
Wyświetlenia
643
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTink RGB2COMP or COMP2RGB with this SCART-Brace.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

Printing:

  • Use Duramic 3D PLA or equivalent

  • 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls

  • No brim or supports necessary

Assembly:

  • Insert your male SCART cable into the RGB2COMP.

  • Drop the SCART-Brace over the top.

Revision History:

  • Rev1 adds snapfit clips.

 

Note: Amazon links are affiliates.

Tagi