SCART Brace for RetroTINK RGB2COMP and COMP2RGB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A SCART brace for the RetroTINK RGB2COMP and COMP2RGB.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 69
- Makes
- 1
- Views
- 643
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
SCART. It delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Keep the SCART connector in place on your RetroTink RGB2COMP or COMP2RGB with this SCART-Brace.
This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.
Printing:
Use Duramic 3D PLA or equivalent
0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls
No brim or supports necessary
Assembly:
Insert your male SCART cable into the RGB2COMP.
Drop the SCART-Brace over the top.
Revision History:
Rev1 adds snapfit clips.
Note: Amazon links are affiliates.