Velomobile race hood retainer hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook for DF(XL) velomobile racing hood. The manhole edge of DF velomobile is quite sharp and hurts my shoulders in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hook for DF(XL) velomobile racing hood.
The manhole edge of DF velomobile is quite sharp and hurts my shoulders in large bumps. I put rubber edge protection strip like this one https://www.amazon.co.uk/Self-gripping-edge-protection-seal-strip/dp/B00MQXLDU0 on.
The strip makes the edge about 10 mm wide and the original hooks don't fit anymore, they have about 3-4 mm wide mouth.
This fits snugly over the edge with rubber strip and holds the hood in place very well.
Print Settings
Printer:
FLSun Delta
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
75%
Filament:
BasicFil PLA
Orange
Notes:
I used BasicFil PLA filament and 75% infill. Printed laying on its side with skirt for better adhesion.
Has held a couple of rides with no deformation so PLA is probably OK.How I Designed This
Designed with Fusion360
Category: Sport & Outdoors