1 / 4
Raspberry Pi 4 Case with Extrusion Mount and FFC Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed the case for Raspberry Pi 4. Can be mounted vertically or horizontally. Has FFC clamp to secure in place
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
RPi 4 case.
Can be mounted on any extrusion slot with M3 T-nut
Can be oriented Vertically or Horizontally
Here's the BOM to fully assemble the unit:
Bill of Materials (BOM)
- Pi 4
- 2x M3 T-nuts
- 2x M3 x 8mm Socket Cap screws
- 2x M3 heated inserts
- 2 - 4x M3 x 20mm Socket Cap screws (for fan)
- 4x M2 x 8mm Socket Cap screws (to mount RPi to the enclosure)
- 2x M2x4mm Heated inserts (for FFC Clamp)
Assembly Instructions:
- Tighten 2x M2 x 8mm screws on the side closer to the 40-pin header to secure the Pi with the Bottom Bracket
- Slide the FFC through the slot on the Case Lid and insert it to the FFC header on the Pi
- Close the lid
- Tighten 2x M2 x 12mm screws on the other holes on the Pi
- With 2x M2 x 4mm Heated inserts, put them on on the Case Lid
- Secure the FFC with the FFC Clamp on to the Lid
- Mount the Pi to the top extrusion on the printer in the orientation you like
Updates:
- R2: Increase the hole distance so the FFC clamp can be mounted easily
If you think the model is useful, please feel free to donate to support future development work