1 / 4
Raspberry Pi 4 Case with Extrusion Mount and FFC Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed the case for Raspberry Pi 4. Can be mounted vertically or horizontally. Has FFC clamp to secure in place
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 355
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
RPi 4 case.
Can be mounted on any extrusion slot with M3 T-nut
Can be oriented Vertically or Horizontally
Here's the BOM to fully assemble the unit:
Bill of Materials (BOM)
- Pi 4
- 2x M3 T-nuts
- 2x M3 x 8mm Socket Cap screws
- 2x M3 heated inserts
- 2 - 4x M3 x 20mm Socket Cap screws (for fan)
- 4x M2 x 8mm Socket Cap screws (to mount RPi to the enclosure)
- 2x M2x4mm Heated inserts (for FFC Clamp)
Assembly Instructions:
- Tighten 2x M2 x 8mm screws on the side closer to the 40-pin header to secure the Pi with the Bottom Bracket
- Slide the FFC through the slot on the Case Lid and insert it to the FFC header on the Pi
- Close the lid
- Tighten 2x M2 x 12mm screws on the other holes on the Pi
- With 2x M2 x 4mm Heated inserts, put them on on the Case Lid
- Secure the FFC with the FFC Clamp on to the Lid
- Mount the Pi to the top extrusion on the printer in the orientation you like
Updates:
- R2: Increase the hole distance so the FFC clamp can be mounted easily
If you think the model is useful, please feel free to donate to support future development work