Commodore C64 The Expert Trilogic cartridge housing case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high.
In the slicing software I added a decorative strip to the case but it is not obligatory. However, if you want the inscription and logo to be clearly visible, use one layer with a contrasting colour as its background.
You may find two versions of upper shell - plain one is designed for those who want to reproduce the original cartridge sticker.
This project was developed in collaboration with Jason_M: https://www.printables.com/pl/social/6073-jason_m/about
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament:
Plast Spaw PLA
Multicolor
Notes:
Print the case halves face up and use the supports for the inside. I suggest to use 3-4 perimeters.