Dog Poop Bag Wall Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple customizable wall mounted dispenser for dog poop bags.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 1390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Simple customizable wall mounted dispenser for dog poop bags.
Print parts and cut to size two equal sizes of an aluminum angle with 1/16 inches thickness and 3/4 inches width for the rails. For my build I used one of these that I cut in half: https://www.homedepot.com/p/Everbilt-3-4-in-x-36-in-Aluminum-Angle-Bar-with-1-16-in-Thick-801377/204273984
Tails will slide into place and hold their positions after you secure the top and bottom part each with a screw into the wall, final part that holds the bag needs to be glued to bottom part.
Print instructions
You need to print the Top / Bottom part twice. Make sure to observe the orientation in your print bed so that the flat side is facing down
No support materials needed!