Dog Poop Bag Wall Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple customizable wall mounted dispenser for dog poop bags.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 37
- Makes
- 1
- Views
- 1,390
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
Simple customizable wall mounted dispenser for dog poop bags.
Print parts and cut to size two equal sizes of an aluminum angle with 1/16 inches thickness and 3/4 inches width for the rails. For my build I used one of these that I cut in half: https://www.homedepot.com/p/Everbilt-3-4-in-x-36-in-Aluminum-Angle-Bar-with-1-16-in-Thick-801377/204273984
Tails will slide into place and hold their positions after you secure the top and bottom part each with a screw into the wall, final part that holds the bag needs to be glued to bottom part.
Print instructions
You need to print the Top / Bottom part twice. Make sure to observe the orientation in your print bed so that the flat side is facing down
No support materials needed!