Cereal Box Spool Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple standoff to keep your spool elevated inside a cereal box
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 1678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Wanted simple storage that would keep my nicer filaments dry without breaking the bank or taking hours to print so I came up with this simple design. It is basically a standoff for the spool so I can dump silica beads right into the bottom of the container without the spool sitting in it. Prints pretty quickly and is plenty strong enough at 15% in PLA for what its doing.
I ordered a few 4 packs of these :
https://www.amazon.com/Container-Airtight-Storage-Containers-135-2oz/dp/B07HRKJYJF
I kept the width a little narrower than the ID of the bottom of the box in an effort to save a little time and filament as well as try to keep it as universal as possible for other cereal box brands/widths. If the size isn't to your liking:
Open file in Fusion > Modify tab > Change Parameters. Here you can easily alter width, length and height. The length and width are absolute values where as the height is an incremental value (go negative to make it smaller).
If there are any changes/updates you would like to see please mention it in your make!