1 / 3
Coat of arms of Ukraine a.k.a. Tryzub — zdjęcie 1
1 / 3

Coat of arms of Ukraine a.k.a. Tryzub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shield with relief of the national Ukrainian symbol.

Ocena
0 / 5
Polubienia
15
Pobrania
56
Wydruki
0
Wyświetlenia
307
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Designed to be printed with a gap to insert 2 magnets (25x10x3 mm)  and to be printed with different filaments to get the contrast relief

instructions

After slicing (without supports), manually modify the .gcode file to insert the pause command (e.g. M600 for marlin fw) between the desired layers.
If you haven't ever done it before, consider experimenting with this command with a smaller model like a tiny cube.

In my case I've done it twice:

  1. to insert the magnets
  2. to swap the filament in order to obtain the contrast relief

beside the .stl a blender file is provided in case you know how and you wish to change the model for your needs.

notes and tips


I've decided to design to push the limits of my skills:

  1. designed using a software I was not super familiar with 
  2. magnet insert
  3. filament swap
  4. test new slicer

On the way I've learned a couple of things: 

  • M600 has different options to automate the filament swap (like the amount of filament to unload and load and the placement of the extruder read the documentation and consider which argument to use for your needs
  • when printing models with a void it is necessary to drill a tiny hole between the external surface and the void volume otherwise .stl files do not create the internal surface. (not 100% sure if this is a limitation of the slicer, of the 3d modelling software or of the .stl file)
  • when exporting a blender object you might need to specify to export only the selected object. otherwise by default all the object in the scene are exported.
  • when dealing with magnetic inserts some caution need to be paid to avoid the magnet to  be attracted by other inserts, printer hotend (and keep tools away from your printer while printing) In my case I had to print a fan duct  to replace the original one that is made out of metal. 

If you like this model, have a look at the rest of my models.
please post a make if you decide to print it, leave a like and consider following 

Tagi