Talon triple magazine clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magazine clamp that connects 3 Talon magazines together at an angle. Works with original Worker Talons, angled Talons…
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 110
- Wydruki
- 3
- Wyświetlenia
- 733
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magazine clamp that connects 3 Talon magazines together at an angle. Works with original Worker Talons, angled Talons and printed Thanhlons and possibly others. For assembly two M3 nuts need to be inserted into the pockets and two bolts M3x16mm (or longer; up to 28mm) secure the halves together. The bumper friction fits to the bottom.
On the inside there are pockets to insert 20x20mm foam rubber pads (selfmade or storebought self-adhering ones). This feature is optional but it provides a more secure grip of the magazines.
.stp files are included.
Print Settings
Supports:
No
Notes:
I'd leave print orientation as is and print without support. Bridging of your printer should work just fine
Category: Toy & Game Accessories