1 / 2
Adafruit Motor Shield and Arduino Uno Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for an Arduino project with an Adafruit Motor Shield V2
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 984
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is an enclosure for an Arduino project with an Adafruit Motor Shield V2. I did print them roughly on a FDM printer, but the rods would render much better in resin. The pins made accessible on the top are 5V, GND, A0, for a pulse sensor. Kind of specific, but I did search for something like this for the Adafruit Motor Shield before taking on a remix. Original Fusion model from Taylor Stein.