Board-sized AVID Gyro Spaceship Location/Orientation Display Device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smaller AVID Gyro Spaceship Location/Orientation Display Device, fits on the Attack Vector: Tactical board
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A board-size AVID marker for Attack Vector: Tactical, Birds of Prey, or Squadron Strike. Due to the size, it's recommended to print in a light color and mark the indicators with paint, or you can cut up 2.85mm filament and glue small pieces in.
I recommend printing the keys with the openings facing up, otherwise it prints very easily on just about any printer with parts in normal orientation.
I need to get measurements of the length of the other ships to make the slight modifications to stretch the Pitch Frame and Ship stand-in.
The starboard and port keys should have a tiny bit of glue applied in the notch. Generally you're tilting the entire frame, rather than using the indicator keys to adjust pitch, so size was a priority over strength in this spot. The roll keys run quite deep so they should be fine to be used to roll the ship. If it's a bit too hard to rotate, you can file down one the indexing nubs slightly, but don't file both at once without testing between, as it's much easier to take away a little more than put it back.