Board-sized AVID Gyro Spaceship Location/Orientation Display Device
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smaller AVID Gyro Spaceship Location/Orientation Display Device, fits on the Attack Vector: Tactical board
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
A board-size AVID marker for Attack Vector: Tactical, Birds of Prey, or Squadron Strike. Due to the size, it's recommended to print in a light color and mark the indicators with paint, or you can cut up 2.85mm filament and glue small pieces in.
I recommend printing the keys with the openings facing up, otherwise it prints very easily on just about any printer with parts in normal orientation.
I need to get measurements of the length of the other ships to make the slight modifications to stretch the Pitch Frame and Ship stand-in.
The starboard and port keys should have a tiny bit of glue applied in the notch. Generally you're tilting the entire frame, rather than using the indicator keys to adjust pitch, so size was a priority over strength in this spot. The roll keys run quite deep so they should be fine to be used to roll the ship. If it's a bit too hard to rotate, you can file down one the indexing nubs slightly, but don't file both at once without testing between, as it's much easier to take away a little more than put it back.