Silver Arrow Soapbox Race Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This little soapbox racer started out life as a project for a 3D printing class, and has only been improving since then.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
Printer:
Prusa MK3S+
Filament:
Tested with PLA
Layer Hight:
0.2
0.1 for axles and wheel nuts
Infill:
25% minimum
Rectilinear
Exterior Perimeters:
2 for chassis and wheels
3 for axles, wheel nuts and steering wheel.
Brim:
Axles yes, otherwise no
Heated Bed:
Highly Recommended
Supports:
On print bed only
Approximated Filament Usage:
15m
Approximated Print Time:
5 hour.
Minor sanding is potentially necessary for a perfect friction fit on the steering wheel.
If the car has trouble going straight forward in your racing environment of choice, increase the infill percent in the chassis.