Silver Arrow Soapbox Race Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This little soapbox racer started out life as a project for a 3D printing class, and has only been improving since then.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 125
- Makes
- 0
- Views
- 744
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
Printer:
Prusa MK3S+
Filament:
Tested with PLA
Layer Hight:
0.2
0.1 for axles and wheel nuts
Infill:
25% minimum
Rectilinear
Exterior Perimeters:
2 for chassis and wheels
3 for axles, wheel nuts and steering wheel.
Brim:
Axles yes, otherwise no
Heated Bed:
Highly Recommended
Supports:
On print bed only
Approximated Filament Usage:
15m
Approximated Print Time:
5 hour.
Minor sanding is potentially necessary for a perfect friction fit on the steering wheel.
If the car has trouble going straight forward in your racing environment of choice, increase the infill percent in the chassis.