Prusa Mini RHD Fan Duct Rev. C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini.
- Ocena
- 4,773 / 5
- Polubienia
- 469
- Pobrania
- 2436
- Wydruki
- 51
- Wyświetlenia
- 17 458
- Oceny
- 44
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini. Files fitting both original Mini and Rev 2 included.
https://www.thingiverse.com/thing:3249344
Print instructions
EDIT 2021-02-16
The shroud has been lowered 3 mm because it sat too high before. Should work better.
Instructions:
- Print the fan shroud in at least PETG but preferably ABS or PC if you're gonna print anything else than PLA with it.
I have included a modded R2 MINDA holder which doesn't obstruct the shroud, so print that too if you're using R2.
Cut the zip tie at the X carriage holding the cable bundle.
Remove the one M3x20 screw holding the 5015 part cooling fan along with the M3 nut on the other side of the fan.
Fasten the shroud to the heatsink using the M3x8 screw.
Fasten the 5015 fan to the shroud using the M3x20 screw you salvaged from the previous position and the M3 nut.
Fasten the modified minda rev2 holder.
Zip tie the cable bundle again.
Happy printing!
(extended) Bill of materials:
1x M3x8
1x Zip tie
Credits:
Prusa Research
RH_Dreambox
Thanks anonymous community member for the great work of adapting the MINDA holder to retain the cooling performance as best as possible. Also for the comparison photos.