Bambulab X1C Side Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this spool holder so the spool can be placed on the left side of the printer and not on the back
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 629
- Wydruki
- 6
- Wyświetlenia
- 8012
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
If you select the step file, make sure to reorient the holder so that the teardrop shape hole is facing the correct way!
Print 1 “Spool Holder” I suggest using paint on supports on the overhang where you will screw on metal spool holder that came with your printer
Print 3 “Retainer”s. This is because the weight of the spool will push down on the spool holder to the point where it might break if not supported; uses 3M VHB tape; otherwise you have to drill into side of printer.
1 roll of VHB tape (1mm thick) to hold the “Retainer”s to the side panel of the printer. It is imperative that whatever double sided tape is 1mm thick and is of good quality. You do not want the retainers to pop off months from now.
TWO M3 x 20 mm screws. To screw the spool holder to the back of the printer
TWO M3x8 mm screws. To screw the metal spool holder that came with printer to the 90degree printed spool holder
TWO M3 nuts to hold the M3x8 screws
0.4mm nozzle
PETG because it is ductile
25% infill, 6 perimeters