1 / 4
Power Hammer for Playmobil Excavator 3001 — zdjęcie 1
1 / 4

Power Hammer for Playmobil Excavator 3001

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade your Excavator with a power Hammer!

Ocena
0 / 5
Polubienia
16
Pobrania
95
Wydruki
0
Wyświetlenia
805
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Upgrade your Excavator with a power Hammer!

I wanted to not simply have one fixed part, it should move! Spring is a bit stiff but does the job. Printed in PETG so the spring gets its springiness ;) but PLA should owrk as well. Print the outer part upright to get the tolerances right. Fit is pretty tight. 

You can use the existing bolts (removing them will require a good amount of force, just pull with a tool). Light pretensioning when installing the inner part is on purpose so it does not rattle. 

Pretty long lasting, was in testing by trained professionals :) for about half a year now without any damage.

 

Tagi