1 / 4
Power Hammer for Playmobil Excavator 3001 — image 1
1 / 4

Power Hammer for Playmobil Excavator 3001

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Upgrade your Excavator with a power Hammer!

Rating
0 / 5
Likes
16
Downloads
95
Makes
0
Views
805
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

Upgrade your Excavator with a power Hammer!

I wanted to not simply have one fixed part, it should move! Spring is a bit stiff but does the job. Printed in PETG so the spring gets its springiness ;) but PLA should owrk as well. Print the outer part upright to get the tolerances right. Fit is pretty tight. 

You can use the existing bolts (removing them will require a good amount of force, just pull with a tool). Light pretensioning when installing the inner part is on purpose so it does not rattle. 

Pretty long lasting, was in testing by trained professionals :) for about half a year now without any damage.

 

Tags