246 models
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Solve the initial puzzle, assemble the robot following the instructions in the .PDF file, understand the basics of mechanics and its problems, once assembled, solve the kinematics problems that engineers have to face to make a manipulator…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
G3/8" Threaded Hydraulic Cap – Print It, Use It, Love It! Ditch the heavy, expensive metal caps and upgrade to this smart, precision-designed G3/8" threaded hydraulic cap. Engineered for a snug, leak-free fit, it locks in place without…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
uses a 5/16 bolt to keep it clamped print without supports brim also put a gcode in here as well made with freecad
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
doporučuji tisknout z pevnějších materialů jako je ABS, PETG, PC,…. podpěry nejsou třeba pokud se vetší díl tiskne pod úhlem (na skosenou plochu) ----------------- I recommend printing from stronger materials such as ABS, PETG, PC,….…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
During maintenance, these shims can be fitted instead of Hope X2 brake pads when changing the pads so the pistons can be pressed back into the brake body. Levering against these shims is a little easier than using the old brake pads as…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
This model fixed my sinking office chair for good. Simply remove the clip on the very bottom of the chair holding the piston in place. The shaft/piston is easily removed from the chair legs/base. Slide the printed part on the shaft. Put…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Mounting plate for Bafang hydraulic brake sensor modules to Shimano Deore brakes. Screws onto the handlebar mounting bolt so maintains its position better than cable ties alone to the irregular shaped brake reservoir/cylinder body. Use a…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
A hydraulic piston looking abdomen armor for Dummy 13. This is a hard print, it'll probably not work on 100%-150% builds, and will need supports. The looks are worth it, though.
Summary This is a easy-to-print 1:24 scale model of a hydraulic car jack. Print Print with 0.1 layer hight. No supports are needed. Use 3 perimeters and 20% infill. Dimensions at 100% scale (1:24) Height: 42.3mm Width: 16.5mm Length: 39mm…
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
This brake tool is easy to use. This brake tool is an essential tool for any bike owner or mechanic. A brake tool suitable for bike hydraulic disc brake calipers, which can compress your piston within seconds when replaced. It is designed…
an hydraulic pump designed to empty cans of HV46. tested with water and mineral oil use it with a drilling machine updates will come P/S in BSP 3/8
https://youtube.com/shorts/Jw6yVkRwt7k https://youtube.com/shorts/EY8BV4jkzCg This is a working, fully 3D printed ram pump! I used PLA for the main components and 95 shore TPU for the seals and valves. It has garden hose threads on the…
I have a roof rack with a thru-axle mount, so the bike rides at the top of my car with the front wheel removed. I've added a simple loop to the end of this brake caliper spacer, so that I can thread a rubber band through and wrap it…
Pipe clamps DIN 3015 (fastening - welding) [6-102 mm] Based on Stauff's models
1/43 scale model of a hydraulic ramp. easy print, simply print it 2 times and press the lifting fork into the pillar in the desired hight. Print Settings Printer: Geeetech A10 Rafts: No Supports: No Filament: Enotepad PLA blue Category:…
These are used to seal hydraulic flange fittings while performing a repair. They help to keep oil in and contaminates out. There is -12, -16, -20, -24 and -32 sizes available, These should all be able to be used with code 61, 62, and Cat…
brake bleed cup for hydraulic bike brakes
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
I believe this works for Tiagra, 105, Ultegra & Dura Ace - Shimano calipers that use K series brake pads It also works for Altus BR-UR300 calipers - or calipers using B series brake pads.
This is used to install a new insert & olive if you shorten your hydraulic hose lines. It lets you grab the hose while you tap in a new insert without crushing the hose. How I Designed This Based on a pair that came with my rear hydraulic…
Since I met 3D technology in 2010 dreamed of my own 3D printer, and my first project was ... hydraulic turbines. I have a good reason: a farm with 16000m2 with a small flow of water, my goal is an open source micro-hydro installation. My…
Stable adapter for usual hydraulic lifting jack which fits for BMW i3.
Bruder Hydraulic cylinder part 1070/2 1070/3 from 44003 for front loader. 100% compatible with original part. I printed model from PETG, layer 0.15, 10 perimeters = no infill. czech: Bruder Hydraulické pístnice díl 1070/2 1070/3 z 44003…
This item can be inserted into the Shimano Tiagra RS405 hydraulic brake calipers to secure the brake pistons against accidental actuation of the brake lever when the wheel with the brake-disc is removed from the bike. Such actuation might…
Modeled after this Model, for this Cartrend brand jack: https://www.amazon.de/Cartrend-7740014-Rangierwagenheber-Hydrau
Verschlussstopfen für verschiedene Hydraulikverschraubungen. Kommen immer mehr Größen dazu. Bitte nur als Ölauslaufsicherung benutzen. Nicht unter Druck setzen. Sealing plugs for various hydraulic screw connections. More and more sizes…
Protective pad for generic 2T (2000kg) hydraulic floor jack. Ideally print this in TPU 95A or softer. I personally printed with 5 walls and 70% infill (eSUN TPU 95A), but I reckon you could go a bit softer with settings or with softer…
A simple cutter to get a square cut on bicycle hydraulic brake hose. Items needed: 1x X-Acto X11 Knife Blade 3x M3x6mm Socket Head Cap Screws 1x 4mm OD x 35mm long x 0.4mm thick compression spring (a spring from a disassembled clicky pen…
Knob for the release valve on any hydraulic jack using a T shaped release valve, such as the one used on the Harbor Freight 20 Ton Air/Hydraulic Bottle Jack (item #59426). Print at 100% infill and with 6 or more vertical shell perimeters.…
Template for drawing simple hydraulic diagrams with pencil. Can also be used as a rule.
Just a replacement of something like: Can be seen on UNC 060, 061 or 750 made in ZTS Zvolen, Slovakia. Will work on other Hydraulic couplings. You can attach the lace to hold the cover on hose. My Print Parameters: Resolution: 0.20…
The current HF red 4 ton hydraulic bottle jack requires a different release knob than previous versions on posted repositories. Print with 4-6 walls and 25-40% infill I printed mine with PLA-CF and has worked great.
I saw this in Park Tool's bleeding video & thought it was neat. I was about to print someone else's Shimano bleed block, but I decided to quickly model this one instead & have it work for every caliper I might encounter. I guessed most of…
Holders for bicycle hydraulic brake bleed syringes. The tools hold both syringes upright during a brake bleed, allowing you to have both hands free! Printed in PLA or PETG or other material for the parts and TPU for the rubber bands. I…
This is a simple tool used for the same purpose as the Park Tool PP-1.2 . Sometimes you need to spread the pistons out on a hydraulic caliper to accept a disc rotor. Oftentimes the brake lever is accidentally pulled without a rotor in the…
i was working and a customer brought in his road bike to bleed his brake's. we had the ATB (m5) version but not the road (m7) so i found one online. it works great if you already have the ATB kit from Shimano I used a brim, printed in…
This is a small print that allows you to place the handle securely on top of the 12-Ton press. Print two of them. Snaps into place.
Dust covers for Hydraulic Quick Connectors found on John Deere Subcompact tractors. The factory dangly style covers tend to get ripped off / lost. Fit ISO 5675 ¼" AG Quick Connectors 1025R 1023E, others(?) The Female Boot needs to be…
Ford N-series Tractor Hydraulic Adjustment Jig. The adjustment jig is based on the Nuday HG 101 jig that was used by Ford service mechanics back in the day. Zane Sherman took the measurements, for for almost 2 decades sold the "Zane's…
A simple form fit bite valve cover for Osprey Hydraulics LT Reservoir. You can use any method to tie it down. I used an elastic band as that was handy.
Once you squeeze the lever withou the disc, the both cylinder of the hydraulic brake caliper will be closed. You'll need 2 of this tool. steps: 1. slightly loost the screw of the hand shifter's oil tank 2. insert 2 of this tools from both…
Model of a hydraulic cylinder I used for a Halloween costume. Glue together one body and one large end. I used the basic cylinder tool in the slicer to make a 19.5 x 200 mm cylinder that is glued into the small end. The cylinder body is…
Angled holder for the Bafang hydraulic brake sensors. Use 3 zipties and double sided tape from the back to attach. Printed with PETG on its side, with 5mm brim.
Model hydraulické ruky považován za učební pomůcku do hodin fyziky. Tento model je určen k demonstraci Pascalova zákona, nestlačitelnosti kapalin a funkčnosti hydraulických zařízení. Modelovací program: Fusion 360 Doba modelování: cca 30…
Add a standard 0-1 dial indicator to the strightness tester to complete. See this video for usage instructions. https://youtu.be/WTVM7WTz8fc
The parts are tight enough to fit together. (Do not use glue.)
This spacer is specially designed for bicycle brake systems, which can support it and prevent it that has no effect to brake. Using on-wheel removal, adopts a professional design, great for bicycle repair, and will bring you a much more…
Insert (green) makes it easy to get a straight clean cut when trimming hydraulic hose to length prior to inserting a barb. designed for standard #11 Xacto blade (same as the Shimano tool). Design can be modified using Onshape:…
To my surprise I wasn't able to find a existing generic hydraulic piston model suitable for repairing Bruder excavators. This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is…
Context During transportation, removing the front wheel on mountain bikes may be necessary. When the front wheel is removed the brake may close and be stuck together if the mechanism is hydraulic. The model is a standard clip spacer to…
Again a huge thanks to my buddy Qwarzz for help with the CAD side of things! A block that attaches to the VKB T-Rudder pedals and allows you to attach a hydraulic motorcycle steering damper to the pedals. Improves the feel of the sprung…
Rubber Pad for Hydraulic trolley jack like Vdema RWH2HM or Unitec 2 ton (on Amazon). Print instructions Supports: No Resolution: 0.2mm Material: TPU (Shore 95A or harder, harder is better for heavy loads) Infill: 100% Extrusionfactor:…
I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…
If you want to run hydraulic disc brakes on an older bike frame or one that was designed for cable style brakes, these little adapters will allow you to mount your brake lines to the frame using the existing mounts and M3 hardware. I used…
Lever for the MY 2010-2016 and it is not possible to get a spare part so i designed one. Print with PETG or better materials for heat resistance and strength. Print with 7 perimeter and about 50% infill. Print with the fillet on top and…
uno strumento di controllo delle siringhe realizzato a moduli collegabili in modo da realizzare il pannello con il numero di comandi che ti serve ho utilizzato siringhe da 20ml https://amzn.to/40kuGzL Ispirato da Remote for…
This allows you to quickly release the bottle jack without any special tools.
Plug for hydraulic hose coupling for BG3 (most common coupling on tractors)
Hydraulic Hose Cutter for 5mm Bicycle Disc Brake Hoses Unlike other designs, this cutter allows the hose to pass through rather than requiring insertion. This makes it easier to trim or shorten a hose that is already connected to the…
—————————-Deutsch——————— Hydraulik-/ Deckel für verschieden Leitungstypen. Version 1.0 Initialversion der Transportdeckels zur Vermeidung von Ölverlust oder dem eindringen von Dreck. Allgemeine Schlüsselweite 17mm. Hinweis: Dieser Deckel…
This is a cup and plug for bleeding Shimano MTB Hydraulic Brakes with an M5x0.8 fitting. Not to be confused with Shimano road bike fittings which are M7x0.75 thread, see https://www.thingiverse.com/thing:4672692 for an example. Printing…
The Hydraulic Arm V2 for workshop. it requires syringes and laser cut parts.
F-14 Tomcat Hydraulic Transfer Pump Switch Panel
The original hydraulic pump by Noratlas is a cool design, but I wasn't able to find some of the required components for assembly. Therefore, I did some tweaks - see the list of changes compared to the original design. Simply print the…
I designed this hook and oval “thing” to thoroughly dry out your Osprey hydraulics or similar hydration reservoir. To use, blow into the bite valve to clear out the hose and then dump the remaining water out of the reservoir. Insert the…
This wedge can be used to prevent the brakepads to close accidentially, when the tire is removed and the brake lever is pressed. Can also be used when changing the brake pads. It prints in place and uses very little space in your saddle…
Plug for male hydraulic hose coupling for BG3 (most common coupling on tractors) Improved version to avoid leakage.
Holders for hydraulic bicycle brake bleed syringes. Print in TPU. Pin should be printed in a strong material, I used PC but PETG should also work. PLA twists too easily. I recommend printing by object instead of by layer. Update…
additional vitamins required: 2 m4 hex nuts 2 m4x35 socket head screws 1 m6 hex nut 1 m6x 50 hex head bolt ( if possible grind the tip into a cone to only engage the center of the barb) m6 kob…
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣈⣁⣀⣀⣀⣀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⣼⠋⢉⣉⠉⣉⣉⣉⣉⠀⠀⠀⠀⠀⠀⠀⠀⠀⣤⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⣿⠀⣾⣿⠀⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⣿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠀⠛⠻⠀⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠀⠛⠀⠀⠀⠀…
This one was originally created for use with the Bruder CAT Mini Excavator (02456), but the generic OpenSCAD file is adjustable and it should be quite easy to adjust it also for other models. Note sibling model…
Può essere realizzata in legno o con la stampa 3D ho messo i progetti di tutto con le misure bisogna assicurarsi che i tubi siano ben saldi alle siringhe ho utilizzato 4 siringhe da 20 ml https://amzn.to/40kuGzL 1 siringa da 10 ml…
I found several adaptors like this for sale online but it was a so easy to print one myself that works great for my jack. For jacks with a maximum diameter of 90mm. Sloths 10 and 13mm, 20mm deep. personally used on European cars from…
Designed to go on a 6 ton hydraulic press off ebay. Picture of the valve dimensions it will fit onto included.
Lego luer lock adapter for 10ml syringe. With this prints, a syringe and a peristaltic pump you can make a lego hydraulic system!
Un labirinto che si muove poggiato su 4 siringhe da 20ml che fanno da pistoni. per comandare le siringhe serve stampare anche il modulo di comando Control panel for hydraulic tools with syringes…
John Deere hydraulic connector cover. Best printed in PETG or ABS, fits the original spring
i bought rock shox recon but its have defect - hydro line holder war broken so i make model for this u can use it as u want no any limitation a also add fusion360 original file i print with petg with many walls no cooling and small speed…
This replaces the Hydraulic Remote covers on my Kioti Daedong tractor. Print in TPU
This is a part to place on the brake. It allow you to put in place the sensors to make sure de magnet is aligned to it. Once printed you have to cut the part which is going arround the cable to make it trought. Also i've already make…
On a big truck this would be the hydraulic cylinder which lifts the bed/cargo. This part was missing, I could not find a fitting one.
The hydraulic oil catching assembly on our Massey Ferguson 5713 uses rubber seals that even with normal usage quickly fall apart. I created a cheap printable replacement. The printed version is slightly modified to provide a better seal…
A remix of @LiaIsTheCutestKitten hydraulic press knob to fit a Central Machinery 20-Ton shop press.
Hydraulic ram seal for farm tractor loader with 55 mm rams requiring rams seals size 55x65x12mm. This was the case for my Ålö-Quicke 2000 series farm tractor loader and these seals were made as a quick fix to stop oil from dripping in…
I would like to present models of descriptive plates with which you can organize your boiler room. The whole project was made in Fusion 360 The versatility of this model is based on the installation on pipe insulation by cable tie. You…
Thanks to @Pbourgui_1129854 for the original. This is a release knob for the “cross” style release screws on specifically the Harbor Freight 8 ton long ram air over hydraulic jack but may be used on others as well. It fits nice and tight…
Presentation video in english : https://youtu.be/_MhDAX3RUbk Vidéo de présentation en français : https://youtu.be/cpyjCQfUd9Y English : https://lebois-racing.com/srt-brake-pedal-p1 I printed the master cylinder support A at 50%... it…
I have an old 1954 Minneapolis Moline UB with a roughly equally old Farmhand F10 loader. The hydraulic cylinder seals I replaced just a few years ago blew out so I had to replace again. Seals for this are a bit of a pain to get and what I…
ENGLISH The SRT P1 hydraulic handbrake is based on the same principle as the hydraulic brake pedals: a brake caliper is actuated by a hydraulic circuit in which the pressure is measured. It is directly compatible with the SRT gearbox.…
This model is a SRAM hydraulic brake bleed port cover replacement. Printed in TPU/FLEX it is a match to keep dirt out. The black port cover is the original, the purple is a TPU print with a 0.4mm nozzle.
32 mm Hydraulic Hose Clamp / Ham Radio Antenna Element Mount A two-piece clamp designed for holding a 32 mm diameter hydraulic hose, pipe, tube, or amateur radio antenna element . The split design allows the clamp to be installed around…
Un labirinto che si muove poggiato su 4 siringhe da 20ml che fanno da pistoni. Serve essere in 4 e lavorare in squadra per far entrare la pallina nel foro centrale. Fa parte del Laboratorio Escape School realizzato per Bergamoscienza 2023…
