Magura HS11 hydraulic brake lever / Bremsgriff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magura HS11 hydraulic brake lever / Bremsgriff /// Modelyear/ Modeljahr: 2010 - 2016
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 102
- Makes
- 0
- Views
- 866
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lever for the MY 2010-2016 and it is not possible to get a spare part so i designed one.
Print with PETG or better materials for heat resistance and strength.
Print with 7 perimeter and about 50% infill.
Print with the fillet on top and the chamfer on the bottom side.
The shaft diameter is 4mm - maybe you had to go with a drill to get the dowel pin running free.
The hole for the pressure pin is for an M6 thread and must be cut with a tap.
Since the original pressure pin has a exotic thread diameter of about 7mm, an M6 worm screw with approx. 20mm should be used and secured with a lock nut.
On the pictures you can see my first version without stiffening rip but it works for me now for more than a month without a problem.
The stl is a newer release wit the stiffening rip.
Update: Printed after more than one year on PETG without problems - now i got a roll of Polymaker PA6-CF and absolutly no flexing anymore with this filament.
See picture 2+3