1 / 6
Magura HS11 hydraulic brake lever / Bremsgriff — zdjęcie 1
1 / 6

Magura HS11 hydraulic brake lever / Bremsgriff

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magura HS11 hydraulic brake lever / Bremsgriff /// Modelyear/ Modeljahr: 2010 - 2016

Ocena
0 / 5
Polubienia
9
Pobrania
101
Wydruki
0
Wyświetlenia
865
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lever for the MY 2010-2016 and it is not possible to get a spare part so i designed one.

Print with PETG or better materials for heat resistance and strength.
Print with 7 perimeter and about 50% infill.
Print with the fillet on top and the chamfer on the bottom side.


The shaft diameter is 4mm - maybe you had to go with a drill to get the dowel pin running free.
The hole for the pressure pin is for an M6 thread and must be cut with a tap. 
Since the original pressure pin has a exotic thread diameter of about 7mm, an M6 worm screw with approx. 20mm should be used and secured with a lock nut.

On the pictures you can see my first version without stiffening rip but it works for me now for more than a month without a problem.
The stl is a newer release wit the stiffening rip.

 

Update: Printed after more than one year on  PETG without problems - now i got a roll of Polymaker PA6-CF and absolutly no flexing anymore with this filament.
See picture 2+3

Tagi