plug for axis of the little tikes toboggan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had to replace one plug's axle little tikes toboggan. Original one has a metal "clamp" which i can't print :-) so i…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
I had to replace one plug's axle little tikes toboggan.
Original one has a metal "clamp" which i can't print :-) so i print a plug which hold by friction and friction is obtained due to screew and nut. When you screew, the nut go up and push aside the tube and create friction.
Screw and nut are M4 and 25mm length for the screw
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
25
Filament: SUNLU TUP 98A black
Notes:
Support is in option and only under screew hole ... they must be realy difficult to remove with TPU.
Category: Toys & Games