CR30 mirror bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket designed to attach mirror to CR30. This allows better observation of printing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a method to secure a mirror to printer that allowed me to observe print progress. I used Grainger parts but this could be mixed to use any mirror / screws you have available. Since this bracket was not visible I used all of my partial rolls to print. There are improvements that could be made: I used M4 screws to mount the bracket to the CR30 lower rear frame. the nuts were of a size that allowed me to slide them in the extrusion and when I tightened them they remained in place. I used the M6 screws to secure mirror to bracket.
Grainger:
SHCS M4 x 20mm SHCS Button head M6 x 20mm Hex nut M4 Hex nut M6 Ketchum mirror 6MXZ5 | X4 X2 X4 X2 X1 |