CR30 mirror bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket designed to attach mirror to CR30. This allows better observation of printing.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I needed a method to secure a mirror to printer that allowed me to observe print progress. I used Grainger parts but this could be mixed to use any mirror / screws you have available. Since this bracket was not visible I used all of my partial rolls to print. There are improvements that could be made: I used M4 screws to mount the bracket to the CR30 lower rear frame. the nuts were of a size that allowed me to slide them in the extrusion and when I tightened them they remained in place. I used the M6 screws to secure mirror to bracket.
Grainger:
SHCS M4 x 20mm SHCS Button head M6 x 20mm Hex nut M4 Hex nut M6 Ketchum mirror 6MXZ5 | X4 X2 X4 X2 X1 |