Hans Gruber Christmas tree ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"It's not Christmas until you see Hans Gruber falling of Nakatomi Plaza". Die Hard themed Christmas tree ornament.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
A Christmas tree ornament with a litophane of Hans Gruber falling of Nakatomi Plaza.
It goes over a Christmas tree light and at the same time hangs on a branch above.
The building can be screwed on with M2 screws and nuts or glued. It's a bit tricky to get the nuts in the building but there are slots for them there so it helps to push them into the corners and shake a little so they fall into place. I only used two of the holes as it's enough.
The litophane needs to be glued in place.
I had to use a brim and lower speed on the first layer for the building to get it sticking to the bed but that could be due to old filament. A variable layer height on the box with a 0.10 height for the back side (if printed laying on the bed) would probably get a nicer result on the back side as the angle gets a bit too steep over the corner causing some overhang.
Update 2023-01-03
Fixed spelling error and changed the text at the bottom and the snow flakes to be larger.