Hans Gruber Christmas tree ornament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"It's not Christmas until you see Hans Gruber falling of Nakatomi Plaza". Die Hard themed Christmas tree ornament.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 50
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
A Christmas tree ornament with a litophane of Hans Gruber falling of Nakatomi Plaza.
It goes over a Christmas tree light and at the same time hangs on a branch above.
The building can be screwed on with M2 screws and nuts or glued. It's a bit tricky to get the nuts in the building but there are slots for them there so it helps to push them into the corners and shake a little so they fall into place. I only used two of the holes as it's enough.
The litophane needs to be glued in place.
I had to use a brim and lower speed on the first layer for the building to get it sticking to the bed but that could be due to old filament. A variable layer height on the box with a 0.10 height for the back side (if printed laying on the bed) would probably get a nicer result on the back side as the angle gets a bit too steep over the corner causing some overhang.
Update 2023-01-03
Fixed spelling error and changed the text at the bottom and the snow flakes to be larger.