2"-1.5" NPT Projector Mount Pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 12/13/19 Added short 2"-1.5" Adapter Added 9" Version with cable cutout Will work on adding additional options…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 12/13/19
Added short 2"-1.5" Adapter
Added 9" Version with cable cutout
Will work on adding additional options soon
I have some older installed projectors with a 2" pipe, my new projector side mounts are 1.5 so needed an NPT adapter for 2" down to 1.5" so I wouldnt need to replace ceiling side mount, I also needed to extend pipe a bit. Included a cable cutout for routing AV cabling through pipe.
Shout out to Masterkookus and his NPT Library for Fusion 360, wouldnt have been able to make this without that. https://www.thingiverse.com/thing:2700822
Print instructions
Category: Parts Summary
Update 12/13/19
Added short 2"-1.5" Adapter
Added 9" Version with cable cutout
Will work on adding additional options soon
I have some older installed projectors with a 2" pipe, my new projector side mounts are 1.5 so needed an NPT adapter for 2" down to 1.5" so I wouldnt need to replace ceiling side mount, I also needed to extend pipe a bit. Included a cable cutout for routing AV cabling through pipe.
Shout out to Masterkookus and his NPT Library for Fusion 360, wouldnt have been able to make this without that. https://www.thingiverse.com/thing:2700822
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: No
Resolution: .2
Infill: 20
Filament: Overture PLA Black
Notes:
went with 4 perameters all around.