GoPro 9/10/11 - Rugged Case (2 Variants)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged box style case for GoPro 9, 10 or 11
- Ocena
- 4,867 / 5
- Polubienia
- 1356
- Pobrania
- 4631
- Wydruki
- 74
- Wyświetlenia
- 32 280
- Oceny
- 60
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case is based on my parameterizable "Rugged Box".
A GoPro 8 version is available here.
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.
Versions
Two variants are available:
1 GoPro and 1 battery, plus
- 2 SD cards and an additional battery cover
(This case is wider and also fits the GoPro with the Pass-Through door installed) - 4 SD cards
Assembly
You will need six M3x20 (4 SD cards) or M3x25 (2SD cards) screws to assemble it, and a piece of (soft) foam (9-10 mm thickness) to put into the lid.