Hemera Air Pump Duct Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for aluminum tubing to be attached to a Hemera extruder for air pump part cooling
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
E3D Hemera mount for 5mm OD aluminum tubing to be used as part cooling duct for powerful and direct part cooling, fed by an external air pump. Can be used with Revo, v6, or Volcano hotends.
2x 10mm M3 socket head cap screws to mount to the Hemera
2x 8-10mm M3 screws to clamp down on the tubing
2x m3 x 4mm heat set inserts for the clamping mechanism.
Aluminum tubing used - https://www.amazon.com/gp/product/B005WPAKGC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Tubing bender - https://www.amazon.com/gp/product/B00FZBRSCW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Airline tubing I use - https://www.amazon.com/gp/product/B08CKL328W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I use this air pump controlled by my printer board via an SSR, it's overkill, but it's very quiet and crazy powerful - https://pentairaes.com/outdoor-air-pumps.html
This is 100% inspired by from @brendonbuilds on Twitter, it required a ton of trial and error and was a fun learning experience.