1 / 23
AA and AAA Battery Holders (2, 4, 8, 12, 16 packs) — zdjęcie 1
1 / 23

AA and AAA Battery Holders (2, 4, 8, 12, 16 packs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will…

Ocena
4,833 / 5
Polubienia
65
Pobrania
530
Wydruki
10
Wyświetlenia
1451
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will not slide out. Handy if you want to toss a pack in a bag and go.

It took 2 hours for me to print the 4AA pack at 0.3MM resolution with 20% infill.

Print Settings

Printer:

FLUX 3D Delta

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

20%


Notes:

0.2mm or 0.1mm will require a little less sanding of the retention "bump" if you happen to get any marks on your AA batteries.

Post-Printing =============

Light Sanding of retention "bump" optional

A little light sanding of the retention "bump" at the top of the holder will eliminate any marking that might occur on the batteries. Printing at a finer resolution will reduce the amount of sanding required if any.

How I Designed This ===================

Tinkercad

I used Tinkercad.com to create this.

Category: Containers

Tagi