AA and AAA Battery Holders (2, 4, 8, 12, 16 packs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will…
- Rating
- 4.833 / 5
- Likes
- 66
- Downloads
- 534
- Makes
- 10
- Views
- 1,456
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will not slide out. Handy if you want to toss a pack in a bag and go.
It took 2 hours for me to print the 4AA pack at 0.3MM resolution with 20% infill.
Print Settings
Printer:
FLUX 3D Delta
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Notes:
0.2mm or 0.1mm will require a little less sanding of the retention "bump" if you happen to get any marks on your AA batteries.
Light Sanding of retention "bump" optional
A little light sanding of the retention "bump" at the top of the holder will eliminate any marking that might occur on the batteries. Printing at a finer resolution will reduce the amount of sanding required if any.
Tinkercad
I used Tinkercad.com to create this.
Category: Containers