Portable Air Conditioner Accordion Duct Collar for 5" ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The…
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 432
- Wydruki
- 1
- Wyświetlenia
- 3015
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct.
The outside diameter is 169mm to allow it to be printable on most printers.
I have added a second model that includes screw hole studs for mounting the collar to plywood or like material.
Print Settings
Printer:
FLUX 3D Delta
Rafts:
No
Supports:
No
Resolution:
0.03mm
Infill:
20%
Notes:
I printed this at 220c because it's what my printer/PLA seem to like.
www.tinkercad.com
I used calipers (vernier) to measure the duct and the thread pitch and reproduced it (4 attempts) in tinkercad.
Category: Other